(888) 550-1464

A dryer is the laundry appliance that tumbles clothes through heated air to remove moisture. When it tumbles without heat — or doesn’t tumble at all — Nest Appliance Repair provides dryer repair across Florida, serving Jacksonville, Tampa, Orlando, Saint Petersburg, and Sarasota, for electric and gas dryers from most major brands.

Drying depends on two things happening at once: heat and airflow. The heating element — or the burner assembly on gas models — produces warmth while the blower pushes air through the drum and out the vent. When the heating element fails or the thermal fuse blows, you get tumbling without heat; when lint chokes the vent, airflow collapses and clothes stay damp no matter how long the cycle runs. Our technicians test the heating system, airflow, and drum components to find the cause, then explain the repair and its cost before any work begins. If the washer is the half of the laundry pair giving trouble, see our washing machine repair page.

Common Dryer Problems We Fix

  • Dryer runs but produces no heat — often a failed heating element, blown thermal fuse, or faulty thermostat
  • Clothes take much longer than usual to dry — usually restricted airflow from lint buildup in the vent
  • Drum won’t tumble when the dryer is running — commonly a broken drive belt, worn drum rollers, or failed motor
  • Dryer shuts off in the middle of a cycle — often overheating from blocked airflow tripping the thermal fuse
  • Burning smell during operation — lint buildup near the heating element or a failing belt; stop using the dryer until it is checked
  • Loud thumping, squealing, or grinding noises — typically worn drum rollers, a fraying belt, or failing bearings
  • Exterior of the dryer getting unusually hot — a sign that heat isn’t escaping through the vent properly

Our Repair Process

  1. Describe the symptoms. When you book, tell us what the dryer is doing — no heat, unusual noises, shutting off, or long dry times.
  2. On-site diagnosis. The technician inspects the heating system, airflow and venting, drum rollers and belt, and controls.
  3. Clear quote. You receive an explanation of the problem and the cost of the repair before any work begins.
  4. Repair and test. Once approved, the technician completes the repair and runs a test cycle to confirm proper heating and tumbling.

How we handle every visit is explained on our about page.

Technician repairing a dryer

Maintenance Tips

  • Clean the lint filter after every load — it’s the single most effective thing you can do for your dryer.
  • Check the exhaust vent periodically for lint buildup; restricted airflow is a leading cause of long dry times and overheating.
  • Don’t overload the drum; clothes need room to tumble freely through the heated air.
  • Use the correct heat setting for the fabric you are drying.
  • Keep the area around the dryer clear so air can circulate.
  • Check that the vent hose behind the unit is not kinked or crushed.
Technician servicing a dryer

Service Areas

Dryer repair is available in Jacksonville, Tampa, Orlando, Saint Petersburg, Sarasota.

Frequently Asked Questions

Why is my dryer not heating?

Common causes include a failed heating element, a blown thermal fuse, a faulty thermostat, or — on gas models — a problem with the gas valve or igniter. A technician can test each part to find the failure.

Why does my dryer take two cycles to dry clothes?

This usually points to restricted airflow, often from lint buildup in the vent or a clogged lint filter. Poor airflow traps moisture in the drum and forces the dryer to work much harder.

My dryer smells like something is burning. What should I do?

Turn the dryer off and stop using it until it has been inspected. A burning smell can come from lint buildup near the heating element or a failing belt — both need attention before the dryer is used again.

Do you repair gas dryers as well as electric dryers?

Yes. We service both gas and electric dryers from most major brands.

How much does dryer repair cost?

The cost depends on the failed component and the parts required. You will receive a clear explanation and quote before any work begins.

Why does my dryer shut off in the middle of a cycle?

Mid-cycle shutoffs are usually an overheating response: blocked airflow makes the dryer run hot until the thermal fuse or motor overload trips. Clear the lint filter and check the vent; if it keeps happening, the fuse or thermostat needs testing.

My dryer thumps with every rotation. What's causing that?

Rhythmic thumping usually means worn drum rollers — they develop flat spots as they age — or a belt that has stretched unevenly. Both are replaceable parts, and the noise goes away once they’re renewed.

Which areas do you cover for dryer repair?

We offer dryer repair in Jacksonville, dryer repair in Tampa, dryer repair in Orlando, dryer repair in Saint Petersburg, and dryer repair in Sarasota.

How do I book a dryer repair visit?

Call (888) 550-1464 or send the booking form on our contact page. Mention whether the problem is heat, tumbling, noise, or long dry times so the technician arrives prepared.

Can a dryer be repaired if it's over 10 years old?

Often, yes — many dryers run well past a decade with a belt, heating element, or thermostat replacement. If parts are unavailable or the repair cost approaches replacement value, we’ll tell you straight.

Book Your Appliance Repair

Call us or send the form below and we will get back to you.

(888) 550-1464